CMVR 1989 MCQ PART 4

 

1. Rule 115 of CMVR 1989 describe about

A) Steering gears
B) Emission standards for motor vehicles
C) Specification of tyre
D) Brakes

... Answer is B)
Emission standards for Motor Vehicles

 

2. VLT device manufacturers  shall provide comprehensive warranty/maintenance 

support for the VLT device and facilitate cellular connectivity for a minimum period of two years for new  public  service vehicles and one year for other vehicles under rule ______.

A) Rule 125A
B) Rule 125B
C) Rule 125G
D) Rule 125H

... Answer is D) Rule 125H of CMVR 1989

 

3. During the test the vehicle engine shall be running at idling speed and the sampling probe shall be inserted into the vehicle exhaust system to a depth not less than ______ mm.

A) 100 mm
B) 200 mm
C) 300 mm
D) 400 mm

... Answer is C) minimum 300 mm

 

4. After the expiry of a period of ________ from the date on which the motor vehicle was first registered, every such vehicle shall carry a valid Pollution under control certificate .

A) Three months
B) Six months
C) One year
D) Two years

... Answer is C) One year after initial registration of Motor Vehicle

 

5. The validity of the Pollution Under Control Certificate shall be for ______

A) Three months
B) Six months
C) One year
D) None of the above

... Answer is B)
Six Months( Twelve months for vehicle follows Bharat State-IV norms )
 

6. The type approval certificate of CNG or Bio-CNG or LNG duel fuel kit for retro fitment shall be valid for ________ from the date of the issue of type approval certificate.

A) One year
B) Two years
C) Three years
D) Five years

... Answer is C) Valid for Three Years( Also renewable for Three Years at a time )

7. Emission standatd for agricultural tractors, power tillers, construction equipment vehicles and combine harvesters driven by diesel engines mentioned in _______

A) 115(A)
B) 115(B)
C) 115(C)
D) 115(D)

... Answer is A) 115(A) ( 115AA. --- Emission of smoke and vapour from agriculture tractors, power tillers, construction equipment vehicles and combine harvesters driven by dual fuel diesel with CNG or Bio-CNG or LNG engines.)

 

8. Mass emission standards for _______________ mentioned in Rule 115B .

A) Liquefied Petroleum Gas driven vehicles
B) Compressed Natural Gas or LNG Driven Vehicles
C) Agricultural tractors, power tillers, construction equipment vehicles
D) None of the above

... Answer is B)
Compressed Natural Gas or LNG Driven Vehicles((( Rule 115C-- Mass emission standards for Liquefied Petroleum Gas driven Vehicles  ◆◆◆ 115D -- Retro fitment of hybrid electric system  or electric kit to Motor vehicles◆))) 

 

9. Mass emission standard for__________ mentioned in Rule 115(I) of CMVR 1989.

A) For LPG Powered vehicle
B) For Diesel powered vehicles
C) For Ethanol powered vehicle
D) Motor vehicles running on compressed gaseous hydrogen fuel cell

... Answer is D) 115(I)
Motor vehicles running on compressed gaseous hydrogen fuel cell(115F-Fuel consumption standard)

 

10. Full form of NEERI -.........

A) National Electrical Engineering Research Institute
B) National Energy Engineering Research Institute
C) National Environmental Engineering Research Institute
D) National Environmental Emission Research Institute

... Answer is C)
National Environmental Engineering Research Institute (Nagpur)(( Rule 116 --- Test for smoke Emission)
 

11. Every motor vehicle ( other than an invalid carriage) or a vehicle, the designed speed of which does not exceed _________ kilometres per hour, shall be fitted with speedometer.

A) Twenty-five Kmph
B) Thirty Kmph
C) Forty Kmph
D) Forty-five Kmph

... Answer is B)
Thirty Kilometer per hour(Rule 117)
 

12. Every transport vehicle notified by the Central Government under Motor Vehicle Act 1988 ,and manufactured on or after the 1st October, 2015 shall be equipped or fitted with a speed governor having maximum pre-set speed of ________Kilometer per hour.

A) Sixty Kmph
B) Eighty Kmph
C) One Hundred Kmph
D) One Hundred Twenty Kmph

... Answer is B)
Eighty Kilometer per Hour ___ Rule 118-- Speed governer ( Excluded -- 2-3 Wheeler, Quadricycle,Fire tender, Ambulances, police vehicles)◆◆60 Kmph for dumpers, tankers, school buses, those carrying hazardous goods or any other category of vehicles)

13. No motor vehicle shall be painted in _______ colour except those belonging to the Defence Department

A) Olive green colour
B) Black colour
C) Red colour
D) Yellow colour

... Answer is A) Olive green colour (Rule 121) ◆◆Rule 119-- Horns◆◆ Rule 120-- Silencer

 

14. Vehicle shall bear the identification number including month and year of manufacture, embossed or etched or punched on vehicle at specified place according Rule______ of CMVR 1989. 

A) Rule 123
B) Rule 121
C) Rule 122
D) Rule 120

... Answer is C) Rule 122 of CMVR 1989.

 

15. Every manufacturer shall get the prototype of the part, component approved from any agency as referred to in rule 126 or the Central Institute of Road Transport, Pune and in the case of tyre and rubber components from the _______.

A) National Environment Engineering Research Institute
B) Automotive Research Association of India
C) Indian Rubber Manufacturers Research Association
D) From any of the above

... Answer is C)
Indian Rubber Manufacturers Research Association(Thane)
 

16. The manufacturer of every motor vehicle  shall equip with a seat belt for the driver and for the person occupying the front seat as per rule_____

A) Rule 124 A
B) Rule 135
C) Rule 125 A
D) Rule 123

... Answer is C) Rule 125 A (excluded-- motorcycle and 3-wheelers of engine capacity not exceeding 500cc)

17. Area requirements of motor vehicles transporting livestock ,which of the following are correct per occupant ?

A) Cow and Buffalos -- 2 square meters
B) Horses ane mares -- 2.25 square meters
C) sheep and goats. -- 0.3 square meters
D) Poultry -- 40 cm sq.

... Answer is D) All of the above are correct ( Pig -- 0.6 square meters) Rule 125E.) ◆◆ Rule 125C- Bodybuilding and approval.

 

18. Manufacturers or Importers need to submit every motor vehicle prototype(Excluding Trailer or Semi-trailer) to agency ,prescribed by central government for testing under rule_____ of CMVR 1989.

A) Rule 126
B) Rule 125
C) Rule 124
D) Rule 127

... Answer is A) Rule 126
 

19. Provision of vehicle location tracking device and emergency button mentioned in Rule _____ of CMVR 1989.

A) 125 A
B) 125 B
C) 125 G
D) 125 H

... Answer is D)
Rule 125 H of CMVR 1989(Excluded : 2-3 Wheeler, E-ricshaw)

20. Specifications for tourist vehicles mentioned in Rule_________ of CMVR 1989.

A) Rule 127
B) Rule 128
C) Rule 129
D) Rule 126

... Answer is B)
Rule 128( Rule 127--- Quality certificate by manufacturer(Road worthiness certificate form 22)

21. Minimum seat area required per passenger in tourist vehicles are.....

A) 447 mm × 447 mm
B) 457 mm × 457 mm
C) 445 mm × 445 mm
D) 447 mm × 457 mm

... Answer is D)
minimum seat area 447 mm × 457 mm
 

22. Every goods carriage carrying goods of dangerous or hazardous nature to human life,shall be fitted with tachograph under rule 129 of CMVR 1989, Tachograph means.....

A) An instrument show data regarding speed only
B) An instrument show and record data of engine rpm
C) An instrument to record the lapse of running time of the motor vehicle; time speed maintained, acceleration,deceleration, etc.
D) None of the above

... Answer is C)
An instrument to record the lapse of running time of the motor vehicle; time speed maintained,acceleration, deceleration, etc.(Rule 129)(129A- Spark arrester)
 

23. Where a class label is required to be displayed on a vehicle, it shall be positioned that the size of the class label is at an angle of ________ degrees to the vertical and the size of such label shall not be of less than twenty-five millimetres square .

A) 15 degrees
B) 45 degrees
C) 30 degrees
D) 60 degrees

... Answer is B ) 45 degrees to vertical (Rule 130-- manner for display of class label

 

24. Responsibility of the owner of the goods carriage transporting any dangerous or hazardous goods....

A) Goods carriage has a valid registration to carry the said goods
B) The vehicle is equipped with necessary first-aid, safety equipment, tool box and antidotes as may be necessary.
C) Sufficient understanding of the nature of such goods and the nature of the risks involved in the transport of such goods
D) All of the above

... Answer is D) All of the above

 

25. According rule______ every driver of a goods carriage transporting any dangerous or hazardous goods shall observe at all times all the directions necessary for preventing fire, explosion or escape of dangerous or hazardous goods carried by him while the goods carriage is in motion.

A) Rule 132
B) Rule 133
C) Rule 134
D) Rule 129A

... Answer is B)
Rule 133-- Responsibility of driver
 

26. Which of the following not listed on Emergency information panel of vehicle carrying dangerous or hazardous goods under rule 134 ?

A) Technical name of hazardous good
B)  name and telephone number of emergency service
C) Name of driver
D) All of the above

... Answer is C) Name of Driver shall not be listed. [[◆Rule 135-- Driver to be instructed about goods]]

27. On the occurrence of an accident involving any dangerous or hazardous goods transported by this carriage, driver shall report .....

A) Nearest Police station
B) Owner of the goods carriage
C) Transporter 
D) All of the above

... Answer is D) All of the above

 

28. In respect of dangerous or hazardous good class label mentioned in Rule _______ of CMVR 1989. 

A) Rule 136
B) Rule 136 A
C) Rule 137
D) Rule 138

... Answer is C)
Rule 137
 

29. In label of Explosive class goods, symbol of exploding bomb marked in Black colour on __________ background.

A) Red background
B) Yellow background
C) Orange background
D) White background

... Answer is C)
Orange background 

 

30. In label of Non-flammable class goods, symbol of cylinder marked in Black or white colour on __________ background . 

A) Green background
B) Yellow background
C) Blue background
D) Red background

... Answer is A) Green background 

31. In label of Inflammable gases class goods, symbol of Flame marked in Black or white colour on __________ background.

A) Orange background
B) Yellow background
C) Red background
D) Green background

... Answer is C)
Red background 

 

32. In label of Poison(toxic)gases class goods, symbol of skull and cross bones marked in Black colour on __________ background

A) Red background
B) Orange background
C) Yellow background
D) White background

... Answer is B D)
White background 

 

33. In label of Inflammable Liquids class goods, symbol flame marked in Black or white colour on __________

A) Red background
B) Orange background
C) Green background
D) Blue background

... Answer is A) Red background 

 

34. In label of Inflammable solid liable to spontaneous combustion class goods, symbol flame marked in Black colour on __________

A) Upper half Green 
B) Upper half white
C) Upper half red
D) Upper half blue

... Answer is B) Upper half white 

 

35. In label of Substances which, on contact with water, emit inflammable gases class goods, symbol flame marked in Black or white colour on __________

A) Blue background
B) Green background
C) Orange background
D) Red background

... Answer is A) Blue background 

 

36. In label of Oxidizing Substances class goods, symbol of Flame over circle marked in Black colour on __________ background.

A) Green background
B) Orange background
C) Red background
D) Yellow background

... Answer is D) Yellow background 

37. In label of Poisonous(toxic)substances class goods, symbol of skull and crossbones marked in Black colour on __________ background.

A) Green background
B) White background
C) Blue background
D) Orange background

... Answer is B) White background 

 

38. In label of Infectious substances class goods, symbol of Three crescents superimposed on circle marked in Black colour on __________ background.

A) Yellow background
B) Green background
C) White background
D) Blue background

... Answer is C) White background 

 

39. In label of Radio Active substances symbol of Three segments of circle marked in Black colour on __________ background and parallel border line shall be black and 5 mm thick.

A) Yellow background
B) Green background
C) Blue background
D) White background

... Answer is D)
White background
 

40. In label of Corrosives goods symbol of Liquid spilling from two glass vessels and attaching hand and metal marked in Black colour on __________ background

A) Upper half white and lower half black
B) Upper half yellow and lower half black
C) Upper half green and lower half black
D) Upper half blue and lower half black

... Answer is A)
Upper half white and lower half black With white border 

 

41. Flammable gases means Gases which at 20°C and a standard pressure of 101.3 kPa,are ignitable when a mixture of _______ per cent or less by volume with air

A) 15 per cent
B) 25 per cent
C) 13 per cent
D) 45 per cent

... Answer is C)
13 per cent
 

42. Extremely flammable liquids means Chemicals which have flash point lower than or equal to ______℃ and boiling point less than 35°C..

A) 13 ℃
B) 15 ℃
C) 23 ℃
D) 25℃

... Answer is C)
Flash point lower than or equal to 23 ℃, Boiling point less than 35 ℃ [[ Flammable liquid Chemicals flash point higher than 60 ℃ but lower than 90°C.]]

43. Certificate in Form _______ required if renewing the driving licence to drive a heavy goods vehicle and a heavy passenger motor vehicle.

A) Form 5
B) Form 6
C) Form 6A
D) Form 5A

... Answer is D) Form 5A

 

44. Mass emission standards for flex-fuel ethanol (E85) or E100 and ethanol (ED95) vehicles mentioned in Rule________ of CMVR 1989.

A) 115I
B) 115F
C) 115E
D) 115G

... Answer is C) Rule 115E. ,【 Rule 115H --Mass emission standards for flex-fuel Methanol [M15 or M100 or M85 and Methanol MD 95] vehicles. 】